近年来，邦凯依托深圳本地良好的技术研发环境，不仅在疑难解密领域倾注更多的研发资源，同时也在普通单片机低成本解密方案研究领域加大了投入，在技术攻关中成功研究出了EMC单片机、HOTEK单片机、CYPRESS单片机、MXIC单片机等单片机类型的超低成本解密方案，对其中的部分芯片几乎可实现零成本解密，如EMC系列的EM78P153(E) 、EM78P156(E) 、EPM78P447、EM78P451/458/459 ，HOTEK系列的HT46RXX 、HT48RXX 、HT46CXX、HT48CXX，MXIC系列的MX10FLCDPC、MX10FMAXPC 、MX10MAXDQC、MX10E8050I等等，为芯片解密行业的整体发展以及民族产业振兴、世界电子产业的快速进步作出了突出贡献。
　　邦凯长期致力于业界疑难芯片/单片机解密技术研究、芯片解密成本降低技术手法研究、芯片解密100%成功率技术研究、单片机软件解密技术研究等领域，已率先突破业内数以千计的单片机解密难题。
　　特别是对芯片解密中的过错攻击技术、硬件安全分析、UV 攻击技术、EEPROM 和 Flash技术分析、安全保护位置的查找以及侵入式攻击与非侵入式攻击技术，邦凯均拥有透彻的理解和丰富的实战应用经验，经过多次反复实验，可以为每一款芯片提供最具经济价值、最具可靠性、最具成本控制优势的解密技术手法。

　　IC芯片解密咨询热线：086-0755-83003639
　　E-mail：market2@pcblab.net

　　AT90USB162 特性
　　High Performance, Low Power AVR 8-Bit Microcontroller
　　Advanced RISC Architecture
　　– 125 Powerful Instructions – Most Single Clock Cycle Execution
　　– 32 x 8 General Purpose Working Registers
　　– Fully Static Operation
　　– Up to 16 MIPS Throughput at 16 MHz
　　Non-volatile Program and Data Memories
　　– 8K / 16K Bytes of In-System Self-Programmable Flash
　　Endurance: 10,000 Write/Erase Cycles
　　– Optional Boot Code Section with Independent Lock Bits
　　USB boot-loader programmed by default in the factory
　　In-System Programming by on-chip Boot Program hardware-activated after
　　reset
　　True Read-While-Write Operation
　　– 512 Bytes EEPROM
　　Endurance: 100,000 Write/Erase Cycles
　　– 512 Bytes Internal SRAM
　　– Programming Lock for Software Security
　　USB 2.0 Full-speed Device Module with Interrupt on Transfer Completion
　　– Complies fully with Universal Serial Bus Specification REV 2.0
　　– 48 MHz PLL for Full-speed Bus Operation : data transfer rates at 12 Mbit/s
　　– Fully independant 176 bytes USB DPRAM for endpoint memory allocation
　　– Endpoint 0 for Control Transfers: from 8 up to 64-bytes
　　– 4 Programmable Endpoints:
　　IN or Out Directions
　　Bulk, Interrupt and IsochronousTransfers
　　Programmable maximum packet size from 8 to 64 bytes
　　Programmable single or double buffer
　　– Suspend/Resume Interrupts
　　– Microcontroller reset on USB Bus Reset without detach
　　– USB Bus Disconnection on Microcontroller Request
　　– USB pad multiplexed with PS/2 peripheral for single cable capability
　　Peripheral Features
　　– PS/2 compliant pad
　　– One 8-bit Timer/Counters with Separate Prescaler and Compare Mode (two 8-bit
　　PWM channels)
　　– One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Mode
　　(three 8-bit PWM channels)
　　– USART with SPI master only mode and hardware flow control (RTS/CTS)
　　– Master/Slave SPI Serial Interface
　　– Programmable Watchdog Timer with Separate On-chip Oscillator
　　– On-chip Analog Comparator
　　– Interrupt and Wake-up on Pin Change
　　On Chip Debug Interface (debugWIRE)
　　Special Microcontroller Features
　　– Power-On Reset and Programmable Brown-out Detection
　　– Internal Calibrated Oscillator
　　– External and Internal Interrupt Sources
　　– Five Sleep Modes: Idle, Power-save, Power-down, Standby, and Extended Standby
　　I/O and Packages
　　– 22 Programable I/O Lines
　　– QFN32 (5x5mm) / TQFP32 packages
　　Operating Voltages
　　– 2.7 - 5.5V
　　Operating temperature
　　– Industrial (-40°C to +85°C)
　　Maximum Frequency
　　– 8 MHz at 2.7V - Industrial range
　　– 16 MHz at 4.5V - Industrial range